Phoenix Contact DIN Rail Interface Relay Module SPDT 24V DC 6A

The Phoenix Contact DIN Rail Interface Relay Module is a pluggable SPDT relay module rated to switch up to 6A, with a 24V DC coil voltage for industrial control applications.

Overview

This module features a Single Pole Double Throw (SPDT) contact configuration, providing a single changeover contact capable of switching up to 6A. It operates on a 24V DC coil voltage, with an input voltage range from 19.2V DC to 36V DC. A built-in freewheeling diode provides protective circuitry for the coil. The relay base uses a push-in connection for fast installation and is designed for DIN rail mounting.

Key Features

• Approximate mechanical service life of 2 x 10⁷ cycles
• Rated insulation voltage of 250V AC and surge voltage rating of 6kV
• Low power dissipation of 0.22W max with a typical input current of 9mA
• Typical response time of 5ms and release time of 8ms
• Yellow LED for visual display of operating voltage status
• Silver Tin Oxide (AgSnO) contact material
• Push-in connection accepting a wire range of 24 to 16 AWG
• Grey (RAL 7042) casing
• Operating ambient temperature range of -40°C to +60°C
• UL 508 recognised and approved relay base

Applications

Intended for robust industrial control applications, the module suits DIN rail mounted installations where pluggable relay switching is required. Its push-in connection method supports faster wiring with reduced tooling requirements.

Specify the Phoenix Contact DIN Rail Interface Relay Module when you need a 6A SPDT changeover relay with 24V DC coil operation and push-in wiring for industrial control panels.