Molex Pre-Crimped Squba Lead 1.8mm Socket to Bare End 22 AWG 150 mm

Molex Pre-Crimped Squba Lead is a ready-to-use flying lead with a factory-crimped 1.8mm socket contact at one end and a bare wire end for custom termination. Its 150 mm length and 22 AWG wire suit a wide range of low-voltage electronic applications.

Overview

The lead removes the most fiddly and time-consuming crimping step from wiring harness assembly. The socket end is factory crimped to provide a consistent connection with its corresponding pin connector, reducing the risk of connection failures and supporting overall assembly quality. The opposite end is supplied as bare wire, so it can be soldered, inserted into a different connector, or attached to a terminal according to the requirements of the project.

Key Features

• Factory-Crimped Socket: 1.8mm socket contact crimped at the factory for a consistent connection.
• Bare Wire End: Allows custom termination by soldering, connector insertion or terminal attachment.
• 22 AWG Wire: Offers a balance of current capacity and flexibility.
• 150 mm Length: A standard length suitable for a broad range of internal connections.
• Compact and Lightweight Design: Designed for easy handling and integration into space-constrained enclosures.

Applications

Suitable for prototyping, repairs, and small-scale production where reliability and efficiency are important. It can be used by hobbyists, technicians, and engineers building wiring harnesses, with reduced tooling needs and a lower skill level required for reliable results.

Choose the Molex Pre-Crimped Squba Lead for a practical, ready-to-use 150 mm lead that simplifies wiring harness assembly.