Microchip MCP6022 Dual Operational Amplifier, 10MHz, 8-Pin SOIC

The Microchip MCP6022 is a dual operational amplifier with a 10MHz gain bandwidth product, offering CMOS op-amp operation in an 8-pin SOIC surface mount package.

The MCP6022 features rail-to-rail input and output capability, allowing input and output signals to swing close to both supply rails. It is engineered for demanding applications and provides bandwidth and speed suited to a wide range of electronic designs.

Key Features

• High Bandwidth: Gain bandwidth product of 10MHz, suitable for signal processing and active filtering.
• Fast Slew Rate: 7V/µs slew rate for rapid signal response.
• Rail-to-Rail I/O: Input and output signals can swing close to both supply rails, maximising dynamic range in low-voltage systems.
• Low Power Consumption: Quiescent current ranges from 0.5 to 1.35mA per amplifier.
• Common-Mode and Power Supply Rejection: Common-mode rejection ratio (CMRR) and power supply rejection ratio (PSRR) of 90dB.
• Stable Operation: 65° phase margin at unity gain for stable feedback configurations.
• Active-Low Chip Select (CS) Pin: Allows sections of the circuit to be disabled when not in use.

Applications

The active-low chip select enables power savings by disabling sections of the circuit when not in use, which is useful for battery-powered or energy-sensitive devices. The device is suited to signal processing and active filtering, and it is qualified to AEC-Q100 for automotive applications.

Specifications

• Supply Voltage: 2.5V to 5.5V
• Number of Channels: 2
• Gain Bandwidth Product: 10MHz
• Slew Rate: 7V/µs
• Settling Time (0.2%): 250ns
• Input Offset Voltage: 500µV
• Input Bias Current: 1pA
• Operating Temperature Range: -40°C to +85°C
• Package: 8-Pin SOIC (Surface Mount)
• Qualification: AEC-Q100 for automotive applications

Handling

This is an ESD-sensitive device. Observe proper electrostatic discharge precautions when handling the device.